Caroline Posted June 22, 2016 Share Posted June 22, 2016 Hi all I have very cleverly managed to lose the nosel of the water hose in the cold water tank, it is now somehow restricting the flow of water to the taps and hot water heater. Do you have any idea how to access the tank, is there an access point, or clever ways of getting nosel out. thanks in advance :$ Link to comment Share on other sites More sharing options...
Robbo Posted June 22, 2016 Share Posted June 22, 2016 Do you know if the nozel is actually in the cold water tank or whether it is just stuck in the inlet pipe. Some converters use the inlet pipe as a combined breather pipe. Perhaps if the nozel is trapped in the inlet pipe, it is creating a partial vacuum and therefore restricting flow to the taps. If your tank is slung under the chassis it may be a tad difficult to get to. However, there is normally a large circular access cover plate which can be removed giving access to the tank from the underside. It's then a matter of using some flexible tubing to push out the nozel from the tank side. Best of luck. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.