Chuns Posted May 20, 2018 Share Posted May 20, 2018 Does anyone know how the large roof trim panel that surrounds the rooflight, and the panoramic rooflight at the front, and contains some lights, comes away? I can see no fittings, so am guessing it might be those pop-in fasteners. I am reluctant to try and pull it away unless I'm certain as I'm afraid I might hear a breaking-tearing-snapping noise. And if it is not the method I think, how are the conventional fittings concealed? Thanks, as always for your input. Link to comment Share on other sites More sharing options...
Matrix Meanderer Posted May 21, 2018 Share Posted May 21, 2018 Have you tried asking the staff at Adria UK? Ours was removed by an Adria trained engineer who removed the screws on the rear of the frame and replaced the damaged blind. I think Velcro strips were involved at the front. Link to comment Share on other sites More sharing options...
Chuns Posted May 23, 2018 Author Share Posted May 23, 2018 Sometimes the most blindingly obvious solutions are the most overlooked. Thank you for that, I will give them a call. Cheers Peter Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.