snowie Posted February 3, 2015 Share Posted February 3, 2015 Hello to you all; There are regular moans about rattling mugs and glasses in camper cupboards, and we had plenty of complaints until I decided to recycle a piece of "medium-density" foam, the sort of stuff that comes in an Amazon box, or as the packaging of a piece of electrical goods. The attached photo is of my prototype! I may get around to making a smart version one day, but maybe not. We slide these down the sides of cupboards and shelves, and they work beautifully. The duct-tape reinforces the strips, but if you bought something like a cushion pad from Dunelm (at considerable cost) then you could make the strips of more generous proportions and thereby a bit stronger, Enjoy, Regards alan bell (Snowie) Link to comment Share on other sites More sharing options...
alf Posted February 3, 2015 Share Posted February 3, 2015 How about this, not a rattle to be heard well perhaps as I am deaf but the navigator e is not. This was just a bare overhead locker all work on in UPVC sheet to eliminate painting etc. Alf Link to comment Share on other sites More sharing options...
Brock Posted February 4, 2015 Share Posted February 4, 2015 Our mugs are fatter at the base than at the top so we store them upside down with a slight gap between each other. No rattles. In the past, we've used foam like snowy although we didn't use colour co-ordinating tape. Wish we had! Link to comment Share on other sites More sharing options...
snowie Posted February 4, 2015 Author Share Posted February 4, 2015 Brock - 2015-02-04 9:45 AM Our mugs are fatter at the base than at the top so we store them upside down with a slight gap between each other. No rattles. In the past, we've used foam like snowy although we didn't use colour co-ordinating tape. Wish we had! If they don't rattle then sorted. Otherwise get some that are not fatter at the base cheeers alan b Link to comment Share on other sites More sharing options...
Brock Posted February 4, 2015 Share Posted February 4, 2015 Apologies Alan. What I should have said is that our mugs are wider at the top and narrower at the bottom. So when we turn them over, we have a greater diameter of mug on the cupboard shelf. Got it the wrong way round. Silly me! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.