Jump to content

removing flat battery


old scot

Recommended Posts

hi , hoping someone can help, have 2006 Elddis autoquest 180 on boxer chasis withwith 2.2 Peugeot engine. battery was flat and when I tried to remove it, I fond that the rear positive terminal appears to be covered with some type of terminal wiring block with no apparent means to access terminal....can anyone advise please ...likely going to be yet another senior moment :-(

 

Link to comment
Share on other sites

My 2006 Fiat based MH (engine/cowl unit from the same factory) also has a terminal block on the rear, positive terminal. Remove the negative terminal first and push it aside, then have a good look at the positive one because there is a clamping nut or bolt, I think it's a 10mm. Loosen that and the hwole terninal block lifts off the battery as one.
Link to comment
Share on other sites

  • 3 weeks later...
thanks for advice but was still unable to remove. However was able to get battery charger connected so back on the move once more just have to run once a week to avoid same thing happening and can check with garage when MOT due thanks once again for advice
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...