Posted: 18 February 2017 1:03 PM Subject: reverse camera burstner erllegance
Just joined
Posts: 18
2012 model, I have a waeco LCD M7L and one camera the head will take two cameras and i need to have rear road view added I see you can buy rear replacement camera twin cmera for around £120 to £140 but will I need more cabling ??? or mayme cross power and if another signal wire is available in camera feed any IDEAS PLEASE
Thanks Trevor
I think Conrad Anderson resommends Brigade camera systems for retro-fitting nowadays, but (as Flicka has said) they should be able to advise on what would be needed wiring-wise for adapting a single-camera Waeco system to become a twin-camera one.
Page 27 would seem to be relevant to your system (with its M7L monitor). It looks like the same ‘system cable' was used between the Waeco rear camera (single-lens or twin-lens type) and an M7L monitor, and that swapping a Waeco single-lens camera to a Waeco twin-lens camera would just involve introducing a “RV-33-Adapt” splitter at the monitor end.
If your current camera is not a Waeco model and/or you wanted to fit a non-Waeco twin-lens camera (and/or Burstner has done something bloody-minded), ths could complicate matters.
