kevandali Posted April 6, 2019 Share Posted April 6, 2019 Hi All.Posting on the off chance that someone else has had the same problem?Currently sat in the van with Jim Jams on and jumpers but luckily alcohol is keeping hypothermia at Bay ?? Everything on and in the van seems to be working ok.Hooked up to mains, fridge working ok, boiled kettle on electric ring, cooked on gas, water pump working and toilet flush ok ..... No heating at all?Everything looks fine at the control panel, no fault code, no exclamation warning triangle, nothing.Turned everything off and back on again, nothing No fan kicking in, no tell tale ''click' as the boiler kicks in.Tried on mains and gas, nothing.Currently got my better half wafting me with her hairdrier As I sip my wine.Any ideas at all?? Link to comment Share on other sites More sharing options...
arthur49 Posted April 6, 2019 Share Posted April 6, 2019 Not confident I can help but what is make model of heater and the control panel? If there's no power at all to heater I suggest you check the fuses/circuit breakers which you should be able to identify in the handbook? Link to comment Share on other sites More sharing options...
kevandali Posted April 6, 2019 Author Share Posted April 6, 2019 Turned all off and back on, new fault code E 89 H Link to comment Share on other sites More sharing options...
kevandali Posted April 6, 2019 Author Share Posted April 6, 2019 Will contact dealer on Monday, looks like it could be a software issue?https://forums.outandaboutlive.co.uk/forums/Motorhomes/Motorhome-Matters/Truma-combi-heater/45987/ Link to comment Share on other sites More sharing options...
kevandali Posted April 6, 2019 Author Share Posted April 6, 2019 kevandali - 2019-04-06 11:23 PMWill contact dealer on Monday, looks like it could be a software issue?https://forums.outandaboutlive.co.uk/forums/Motorhomes/Motorhome-Matters/Truma-combi-heater/45987/ Everything just kicked in and started working? ?? Link to comment Share on other sites More sharing options...
Mickt Posted April 7, 2019 Share Posted April 7, 2019 Loose connection? Link to comment Share on other sites More sharing options...
Caddies104 Posted April 7, 2019 Share Posted April 7, 2019 Hi E89H is the Combustion air motor, which can get too hot if using gas and electric, just needs to cool down and it will reset itself once acknowledged the fault. Which it seems is what happened. Other possible, is it needs an update on the panel. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.