Jump to content

Laika 1r central locking issue


Clive lakia vip1r

Recommended Posts

Hi, Been trying install a keyless entry on my 2000 Ducato Laika 1r 2.8 jtd.

Can't find any wiring diagrams for this model/year.

Traced the wires back to the lock on drivers side.

Tried different combinations can open but not close.

Would appreciate a diagram or any info on the five wires.

The wires are;

1. Black

2. Green/White

3.Blue/White

4.Blue/LightBlue

5.Blue/Grey

Thanks

 

Link to comment
Share on other sites

Clive,

 

You state that you have traced the wires to the drivers door lock.

 

I do not have details of your vehicle, and cannot match your colours. However Fiat eLearn for my later x244 Ducato gives the following allocations for the 5 pin connector on the lock motor.

 

1. Motor

2. Motor

3. Unlock command from key

4. Lock command from key

5. Earth (for commands)

 

I see no reason as to why the connections should differ in earlier models.

 

It is a reasonable assumption that your black wire will be the earth connection, and will confirm which pin is No. 5. I would expect pins 1 & 2 for the lock motor, to be normally connected to earth. Check this with a meter connected to 12V +ve. If confirmed this leaves pins 3 & 4, these should show 12V +ve with a multimeter connected to earth.

 

If the above does not correspond with your installation, you should still be able to identify motor and command connections.

 

I hope that the above helps.

 

Alan

 

 

 

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...