Patrick1 Posted July 23, 2022 Share Posted July 23, 2022 Hi, I have not posted on this forum, but use and appreciate the information I find here. I recently traded my 30 year old Weinsberg 650 for a 2014 Hymer exsis-i 588 in Germany. I have installed 2 refillable LPG cylinders. See photos attached. I had the Gas-it one in the old camper. I added the poly 1 that is from Germany (Brexit you know). Now I would like to place the remote guage on the Hymer control panel above the cabin door. I am looking for some guidance. How to route the sensor cable (6m long) through the cabin, how to access/remove the control panel and best way to tap 5V. I was pretty cavalier about these thing in the old camper but wish to maintain the integrity of the new one. There is an accessories outlet on the control box under the left seat, but routing a power cable up to the control panel seems daunting, so I am thinking about splicing into an existing red cable since the current usage in the guage is very low. The other alternative is to locate it at the back and tap off the reading light power. I would appreciate any suggestions or links as this is abig request. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.