Jump to content

Sealing a hole in the floor


Happy Chappy

Recommended Posts

Newbie Motorhomer but long standing caravaner. Need to drill 10mm hole in the floor of our new Compass Avantgarde (Elddis ‘solid’ construction) to pass through the control cable for reversing sensors I intend to fit. There are no other access holes visible. Other cable conduit entry points for the road lights are sealed with a black sealant which is barely pliable and very tough (almost rubber like) and I don’t want to interfere with that. Any tips for the appropriate sealant to ensure watertight and no damp? TIA
Link to comment
Share on other sites

As the hole will only be 10mm-diameter, there will be plenty of options.

 

Personally, I would not use the type of non-setting mastic BruceM suggests (I loathe the stuff) and - if I didn’t already have a suitable product in my box of sealants/adhesives - I’d opt for a rubberised sealant an example of which is shown in this ToolStation advert

 

https://www.toolstation.com/roof-gutter-sealant-300ml/p11002

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...