Jump to content

Swivel Seats for 2019 Relay


Philiom

Recommended Posts

Hi, I am new to this forum, I am in the process of getting a 2019 Citroen Relay L3H3 panel van and convert it into a Camper, I am interested in the swivel seats convertors for the passenger and driver seats to make the space in the back a bit roomier, seen a few for sale and would be grateful if anyone has had any experience fitting them and which company has the best kits to buy from.
Link to comment
Share on other sites

Welcome to the Out&AboutLive forums, Phil.

 

This website carries a lot of campervan conversion information

 

https://www.campervanconversion.co.uk/

 

including advice on fitting swivel seats

 

https://www.campervanconversion.co.uk/fitting-swivel-seats.html

 

As you are aware, there are several manufacturers of seat swivels designed for Boxer/Ducato/Relay vehicles (FASP, MAPA, Sportscraft, etc.) but I’ve no practical experience of retro-fitting and can’t advise on which might be best for you.

 

You might try asking about this on the Self Build Motor Caravanners Club forum (10 free posts)

 

https://sbmcc.co.uk/forums/

 

and/or on the DIY Motorhome forum

 

https://www.diymotorhome.co.uk

 

 

Link to comment
Share on other sites

Hi,

I have just fitted a sports craft swivel in my 2004 fiat ducato. I chose it specifically because it has an offset swivel. This means that when you spin it round 180 degrees, it centres approximately 10cms towards the middle of the van. Perfect if like me you have fixed furniture on that side. I used grasshopper leisure. Price best I could find and recieved excellent service. Fitting is a straightforward affair although I had no underseat wiring to worry about being an older van .simply 4bolts remove chair. Drop on the swivel 4 bolts and replace chair. The seat is German made an excellent quality. Cons are it’s pretty heavy ( I liked this, gave feeling of quality and security)) and it raises seat height by 45mm. Got advice on this forum and great tip to buy a typists footstool. Works perfectly. Good luck. I will attempt to post couple of pics to show the offset benefit.

C85E70EF-F6D6-41FC-9339-BFEACFAB6AED.jpeg.09f20d7e147c4f9e2bd2fc2e67388e4a.jpeg

91B8136C-9567-416B-B8B8-6E4F4364F61D.jpeg.5c5e1a1f978edad5f479ffab42db77a4.jpeg

CB215D71-D453-4090-8B81-13F2D3C72517.jpeg.c7362cd6ca6959d676838f9aa3d98fe7.jpeg

C85E70EF-F6D6-41FC-9339-BFEACFAB6AED.jpg.e787ddec950445ac5976def8a57a2cdf.jpg

91B8136C-9567-416B-B8B8-6E4F4364F61D.jpg.13e71c1c3df148e3533a074fcfe42c3f.jpg

CB215D71-D453-4090-8B81-13F2D3C72517.jpg.6fa7a7f2c2a22c06eb26f134a6285032.jpg

Link to comment
Share on other sites

I'm not sure what swivel bases our Globecar has, but they work quite well. Low profile, so don't lift the seat much, and very easy to work the locking lever, when sitting in either seat just 'kick' back with your inboard foot to release, the only thing I think could be improved would be the ability to lock them in different positions, but I've not noticed any seat swivel that does that.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...