[Leisure battery not charging]

Hi all 

Thanks very much for your prompt responses 

Here is my update

Funnily enough my  wife had said a couple of times that she could smell somthing burning after a long drive 

But as I could not see anything I dismissed it

But she was right (as usual)

As following the very helpful post from Alanb i checked the em40 and found that it had melted the vb in positive plastic connector

so on monday i contacted Apuljack for a replacement and it arrived on Tuesday morning great service recommended

 I fitted it today and everything is working as it should  be bit fiddly took me about an hour

still could not find the split charge relay I think Robin Hood is right 

Thanks again for everyone's input much appreciated 

Barne

[Leisure battery not charging]

Thanks for your reply Keithl

[Leisure battery not charging]

Hi alanb

I was driving through France last week when we had no leasure battery power 

So we decided to turn back it was freezing and no heating

Checked leasure battery not charging with multimeter 

Trying to find split charge relay I took the fuse holder em40 out and found that the vehicle battery input positive had melted the plastic connector 

But Checked if still getting power through to vehicle battery out and was showing OK but still cannot find the split charge relay 

It is a 2015 fiat ducato x290 what is this module from apuljack

Thanks for your help 

How do I pm you with my email address 

[Leisure battery not charging]

Thanks Keith 

Will check them tomorrow very difficult to get at because handbrake very close 

Did not want to take them out just incase I couldn't get them back in 

Do you know if the split charge relay is one of the relays next to the fuses

Cannot feel any click when I start the van

Thanks for your help will let you know how I get on 

[Leisure battery not charging]

Hi 

I have a autotrail tracker 2015 and the leisure battery is not charging 

I have been looking for the split charge relay but cannot find it

Does anyone know where it would be so i can check it is working 

It is a sargent ec500 with a ec300 control panel over the door

Hope someone can help