new to the game Posted January 15, 2009 Share Posted January 15, 2009 V/tank gauge for battery voltage and fresh water or waste volume pointer sticks and doesnt give a true reading when theres heat in the living area. However it works perfectly when van is cold and even at sub zero temps. Has anyone any ideas. 8-) Link to comment Share on other sites More sharing options...
docted Posted January 17, 2009 Share Posted January 17, 2009 Elaine you may wish to make sure that all the connections on the circuits are clean and sound especially the connections behind the gauge/switch. Docted Link to comment Share on other sites More sharing options...
Guest Tracker Posted January 17, 2009 Share Posted January 17, 2009 I've never had ANY van where the tank capacity display has ever been anything other than approximate, and by knowing roughly how much on average we use each day I know that with a full tank I have enough water for at least four or five days so I never even bother looking at the display - I just empty waste and refill fresh every fourth day - or whenever the opportunity presents itself whilst camping on Aires etc and off site. Link to comment Share on other sites More sharing options...
docted Posted January 18, 2009 Share Posted January 18, 2009 Rich Waste and fresh water gauge in Hymer is shared with battery voltage for vehicle and van batteries. That is where EM's problems are. Docted Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.