DAVET Posted July 20, 2009 Share Posted July 20, 2009 Sept o7 Rapido with pioneer Avic-hd3 fitted problem with reversing camera ND-BC2 select reverse after 2 to 3 minutes screen starts to distort (lines across) then just goes blank apart from message screen (image may appear reversed). Any ideas would be a help. Thanks Link to comment Share on other sites More sharing options...
AliB Posted July 20, 2009 Share Posted July 20, 2009 Hi DaveT You need to try and pin down the fault to either the camera, monitor, cable or power source. A previous thread may help you: http://www.outandaboutlive.co.uk/forums/forums/thread-view.asp?tid=16037&posts=2 After the screen has gone blank and you have deselected reverse, how long must you wait before you can reselect reverse and repeat the fault? Link to comment Share on other sites More sharing options...
peterrosey Posted July 20, 2009 Share Posted July 20, 2009 It's worth noting we've got a test of eight camera systems in a forthcoming issue of MMM. Probably the October issue, so watch out for this! Peter R Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.