Swift Bolero Control Panel

[rossko]

We have recently had to have a new control panel fitted & now have more problems with it than we originally had.

Can anyone tell us how we can switch off the 2 centre strip lights but still be able to use the wall lights as we could with the old panel. The new panel is the one with the direction arrows on the right hand side as you look at it. We could previously switch all the lights on then switch off the centre lights via the control panel leaving us able to go to bed or use the bathroom with the wall lights. We cannot work out how to do this with the new panel & cannot believe that it is correct that we cannot somehow use the wall lights without the centre lights.

We are already putting up with the water tank readings being totally incorrect. Various calls to the dealer have yet to produce a response. Any suggestions (re control panel) welcome!!!!

[rossko]

After a very useful pm from Alf I have contacted Swift direct & thought this may be useful for others.

The new control panel we have had fitted is the mark 2 version. This should only be fitted on vans that have independant switches in the van for all the lights allowing you to switch off the central lights & the wall lights independantly. As ours is a 2007 van we should have had a mark 1 control panel fitted not the mark 2 so off we go again on the merry go round of getting parts ordered & visiting the dealer again. At least Swift have been able to advise what the problem is.

[andy mccord]

The symbol of the bulb with the line thru it turns all interior lights off & on, the one showing a roof light does exactly what it shows, turns roof lights on & off, so press the button with the line thru the bulb to turn on the lights, if your roof lights come on simply press the roof light button to turn them off, which should leave all switch button lighting working.

 

Andy