Jump to content

fiat headlight


david ann

Recommended Posts

Just sunk it why you are looking for replacement.

 

The milky or crazing has probably been caused by heat. It could have been caused by beam deflectors or bulbs of too high a wattage being fitted.

Another cause could be the bulb has gone faulty and the filiment coils shorted giving far too much light and heat output until finally burning out ( or indeed may have not yet). Cheap bulbs will also cause a problem if they radiate too much infra red. You must also make sure the bulbs are the UV filter type - most are now. They have a U as part of the bulb type number. Excess UV from the bulbs will cause the plastic to go milky.

 

Jon.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...