urbanracer Posted February 24, 2010 Share Posted February 24, 2010 What is the proceedure for removing the front grill on a new shape Peugeot Boxer(x250)? Link to comment Share on other sites More sharing options...
lennyhb Posted February 24, 2010 Share Posted February 24, 2010 From memory it's a 2 min job a few self tappers along the top of the front plastic section just below the bonnet and the whole panel lifts out with the grill, not done it myself but watched a dealer do it. Link to comment Share on other sites More sharing options...
DJP Posted February 24, 2010 Share Posted February 24, 2010 lennyhb - 2010-02-24 6:07 PM From memory it's a 2 min job a few self tappers along the top of the front plastic section just below the bonnet and the whole panel lifts out with the grill, not done it myself but watched a dealer do it. There are about a dozen self tappers/bolts to undo. 6 or so along the bonnet line. Some down at the bottom, just above the small air intake. Then the whole thing is held in place with a couple of spring clips at the top. Just needs a sharp pull to remove it. The bolt heads are Torx drive heads and not allen bolts or screw heads. It is a really simple job. Link to comment Share on other sites More sharing options...
urbanracer Posted February 24, 2010 Author Share Posted February 24, 2010 Thanks I just wondered if there are any fittings that are hidden. No need to stick your tongue out (lol) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.