rolandrat Posted August 20, 2010 Share Posted August 20, 2010 Can anyone describe the method to remove the Mirrors so as not to remove unnecessary trim? Link to comment Share on other sites More sharing options...
rupert123 Posted August 20, 2010 Share Posted August 20, 2010 Remove trim on the interior behind mirror, take out the fixing screws. Remove the panel holding the electric window switch and you can reach the connector plugs underneath it. When you pull the wires through connect a piece of string to them so you can thread the new ones through otherwise a little awkward. I am assuming all are the same, my van is a 2008 and I replaced a nearside mirror took about half an hour. Link to comment Share on other sites More sharing options...
Guest peter Posted August 20, 2010 Share Posted August 20, 2010 Spot on Rupert. Link to comment Share on other sites More sharing options...
rolandrat Posted August 21, 2010 Author Share Posted August 21, 2010 rupert123 - 2010-08-20 10:31 PM Thanks Rupert, I'm thinking of fitting the mirrors with the smaller arms as mine on the Autotrail Tracker are like Batwings and stick out to far. Remove trim on the interior behind mirror, take out the fixing screws. Remove the panel holding the electric window switch and you can reach the connector plugs underneath it. When you pull the wires through connect a piece of string to them so you can thread the new ones through otherwise a little awkward. I am assuming all are the same, my van is a 2008 and I replaced a nearside mirror took about half an hour. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.