Jump to content

Slides for Conway Cruiser needed


Guest Viv Games

Recommended Posts

Guest Viv Games
Hoping someone out there can help! New to the world of Folding Campers, we managed to bend the female and male rear bed slider whilst putting it up first time in a thunderstorm in the dark!! Can't locate any company that will repair or replace: these parts for 1993 Conway Cruiser are impossible to find. Hopelessly non-mechanical, we need help!! does anyone know of source of spare parts for this obsolete year? We may have to have the whole part made afresh by a sheet metal worker, but what to do with the CC while this is being done? Help!!!
Link to comment
Share on other sites

  • 4 weeks later...
Guest j c barrington
just got replacement for bed slides from the penine group who own conway. try thr penine website for all spares.
Link to comment
Share on other sites

Thanks for the suggestion - already tried that and Pennine said they hadn't got spares for that age Conway. Any way took the whole thing to a sheet metal worker, who diagnosed problem as not caused by us at all, but basically a design fault. He said that the aluminium sheet was not not strong enough and the bolts on the sides that have a larger spacing were not thick enough. he replaced the bolts for larger ones and reinforced the sheets. We have just spent a week away and everything worked well. he pointed out that the same thing is likely to happen on the equiva;lent side at the front - so now we are prepared that when it starts to go we will get it done by him. And he only charged us £40!! Thanks for your advice.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...