harycadbtopenworld. Posted December 28, 2010 Share Posted December 28, 2010 About half of the LEDs in the rear stop light have failed. I can see no way of removing this strip light to replace it, and do not know of where I can get a replacement. Any help please. Link to comment Share on other sites More sharing options...
Guest Tracker Posted December 28, 2010 Share Posted December 28, 2010 Best bet is to phone Autosleepers when they reopen. Link to comment Share on other sites More sharing options...
LordThornber Posted December 28, 2010 Share Posted December 28, 2010 Our Nuevo '03 but doesn't have the LED strip, perhaps yours is late '03. That said, our awning light popped and couldn't see a way to replace the bulb until I got high over the fitting itself and saw a small cut out in the plastic light. A small screwdriver went in and it eased the cover off, perhaps the LED cover is the same? Martyn Link to comment Share on other sites More sharing options...
Dave Newell Posted December 28, 2010 Share Posted December 28, 2010 Assuming you mean the high level rear brake light there should be a phillips head screw at each end. Once removed you should be able to prise the light fitting out of the sealant gunge. 10-1 on its half full of water and they're not always LEDs but tiny capless filament bulbs and can be replaced easily once you've removed the fitting. Drill a 1mm hole at the bottom edge of each end of the fitting to stop water building up inside again. D. Link to comment Share on other sites More sharing options...
David B Posted December 31, 2010 Share Posted December 31, 2010 See http://www.motorhomefacts.com/ftopict-90790-.html It should help you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.