nightrider Posted April 1, 2012 Share Posted April 1, 2012 On my Merdedes Vito work van there are two lights to illuminate the number plate, one of them is not working, I replaced to defective bulb that had blown with a new one and it is still not working, must be a fault somewhere on the line, would that be an MOT failiure? would one working bulb be enough to pass a test. Link to comment Share on other sites More sharing options...
malc d Posted April 1, 2012 Share Posted April 1, 2012 knight of the road - 2012-04-01 4:48 PM On my Merdedes Vito work van there are two lights to illuminate the number plate, one of them is not working, I replaced to defective bulb that had blown with a new one and it is still not working, must be a fault somewhere on the line, would that be an MOT failiure? would one working bulb be enough to pass a test. Is it just a bad earthing connection ? Bit of a clean with wet'n dry required ? Or a fuse ? I was surprised recently to find that nearly all the lights on my car seem to have separate fuses. :-| Link to comment Share on other sites More sharing options...
flicka Posted April 1, 2012 Share Posted April 1, 2012 Hi Malc Only one of two bulbs working = MOT failure, all lights fitted must be working. But I would expect any MOT station would notify you before issuing a failure certificate, if you told them to replace. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.