dawki Posted April 22, 2013 Share Posted April 22, 2013 Hi everyone I need to replace the drive shaft from the winding handle to the gearbox on my Remis rooflight Does anybody know if I can just pull the shaft out from above when gearbox is removed or do I have remove the handle etc. Many thanks Link to comment Share on other sites More sharing options...
armstrongpiper Posted April 22, 2013 Share Posted April 22, 2013 I think you need to remove a circlip from the shaft above the geabox. If the shaft is sheared, then the handle will have to be removed to get the lower half out. When mine broke, I needed to raise the cover to get access to the top of the shaft, but the gearbox didn't need removal. Neil B Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.