Dome ceiling light covers

[pepys1633]

I own a 2005 Autoquest 400RL and intend to change the lighting to LED. Can anyone advise as to how I can remove the 2 domed ceiling light covers to gain access to the bulbs underneath? There doesn't appear to be any screws holding it on so do I prise the chrome bevel off and will it go back or does the cover itself unscrew?

[tugga]

Afternoon

 

I take it you have tried to unscrew the covers and they would not budge? If that is the case, try to hold it in two hands as close to the edge and possible and gently but firmly press your thumbs to see if that makes it spring out. It could be that it is held in place by 3 plastic lugs that clip in.

 

If the above does not work, then its a bit too technical for me.

 

Good Luck

[Bolly1965]

the ones on our Bessacarr (2006) car just on 3 lugs, easy to remove

[Wooie]

I answered a similar question for one of the members last year and put a couple of photos on

to try and help :-

 

http://www.outandaboutlive.co.uk/forums/Motorhomes/Motorhome-Matters/How-to-Access-fluoresence-light-to-check-bulb-/28004/

 

Hope this helps.

[pepys1633]

Thanks, Cheryl. It was secured by 3 lugs. Thanks for the advice.

Regards,

Deryck

[pepys1633]

Thanks, Tony. Thanks for the advice. Have now sorted.

Regards,

Deryck

[pepys1633]

Thanks for the advice and links, Graham. Problem now sorted.

Regards,

Deryck