Jump to content

Dometic Toilet Blade


wurry

Recommended Posts

I suspect the GA of the ceramic is similar to the C200 range in which case:-

Silicon grease round the seal and any other places you can get to, occasionally the seal needs replacing esp if Mineral oil or WD40 has been used instead of silicon, available from your dealer or on line.

Link to comment
Share on other sites

This has been raised on the Murvi site. Silicon grease seems to be the answer . Not cheap I paid £5 an oz ( remember those! ) but it works better than the silicone spray which I am told dries the seal in time and causes it to stick. Tricky to apply as even if you unscrew the top of the cassette you can not get direct contact with all of the underside of the seal but I put some on the edge of the blade and slid it under the seal.Seems to have worked.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...