dipstick0_0 Posted April 21, 2014 Share Posted April 21, 2014 When retracting my fiamma awning it is not going back evenly Can I adjust this by moving one of the arms Sure someone will know what to do Many thanks Alan (lol) (lol) Link to comment Share on other sites More sharing options...
johnnerontheroad Posted April 21, 2014 Share Posted April 21, 2014 Any good? http://www.fiamma.com/download/reparation/arms_regulation.pdf http://www.fiamma.com/download/reparation/Trouble_shooting.pdf Dave Link to comment Share on other sites More sharing options...
dipstick0_0 Posted April 21, 2014 Author Share Posted April 21, 2014 Hi and many thanks for that I will check it out Regards Alan :-D :-D Link to comment Share on other sites More sharing options...
David Dwight Posted April 21, 2014 Share Posted April 21, 2014 Yes you can, you only need to move it a small amount. We had one on 1 of our MHs and the arm was over the door if the awning was out the arm fouled the door. I move both arms with the help of a friend, we move both arms the van side by about 12 inches an then moved the outside ends the same amount, the awning would not wind all the way in, we then moved the outside end in a bit until it closed evenly. Tighten the bolts up finger tight first it makes it easier to move if needing to adjust some more then tighten when satisfied. It wont take long to do with help. Good luck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.