Martyn22 Posted October 20, 2014 Share Posted October 20, 2014 I enjoyed arrival about Clive Mot5s upgrade to his van, so got some strip at Bath and west show I managed to get all lights working and it is as I wanted however on on length I had to cut off 1 section so I thought I would use it as a wardrobe light operated by a door switch I got from maplins however when it was all connected up I was disappointed when the light did not work a test lamp did work so it should have worked. Will a short section of strip work on its own or does it need more than 1 section to work ? :-( Link to comment Share on other sites More sharing options...
lennyhb Posted October 20, 2014 Share Posted October 20, 2014 Normally you can cut them every 3 LED's so any length of 3 ,6 ,9 LED's etc., should work. Double check you have connected them the right way round. Link to comment Share on other sites More sharing options...
Martyn22 Posted October 20, 2014 Author Share Posted October 20, 2014 Thanks Lenny I measure that I had live feed coming from the switch and earth going to negative side of strip but no luck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.