Pipkim Posted November 2, 2014 Share Posted November 2, 2014 The alloy wheels on our 2006 Knaus Sun Ti are showing signs of "bubbling". Has anyone had their alloy wheels refurbished? When I showed photos to a specialist alloy wheels company, they said that they couldn't help due to the "corrosion". Any thoughts? Phil R Link to comment Share on other sites More sharing options...
Robinhood Posted November 2, 2014 Share Posted November 2, 2014 ...there may be a valid reason for not refurbishing them, especially if any corrosion is judged to have weakened the structure. That given, however, some refurbishers seem to have limits as to what they can/will do. I think you need to try one that has the capability to shot-blast and fully-recoat wheels before you give up on the idea. (though, of course, you might already have done so ;-) ) Link to comment Share on other sites More sharing options...
Pipkim Posted November 2, 2014 Author Share Posted November 2, 2014 To me it looks like "blistering" rather than any corrosion as such. I think the company that I approached is "mobile" and comes to you to do the work. Maybe a 3.5T, 7m long motorhome put him off! I will try others in this area - West Norfolk Link to comment Share on other sites More sharing options...
lennyhb Posted November 2, 2014 Share Posted November 2, 2014 There is a company in East Grin stead that does repairs & refurbishment, my mate had his car wheels done I think it was about £60 a wheel. I can find more info if you want. Link to comment Share on other sites More sharing options...
Will86 Posted November 2, 2014 Share Posted November 2, 2014 PhilR The amount of corrosion on or rather INTO alloys can vary according to the materials chemical make up. The more refined an alloy the more its cost. Impurities are added but adjusted for safety, strength and polish-ability. When costs are involved an item can often be produced 'in order to sell' which means that some elements are of a less than perfect match. Not a problem if cleaned and protected well every few miles. Who and where were they made I doubt it could ever be revealed. Corrosion ... for that's what it is can migrate into a material like a rabbit warren depending on the mix. Removing material to the corrosion base may decrease the safety factor. The polishing company may have saved a life and should be congratulated for refusing the job. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.