nick1 Posted April 6, 2015 Share Posted April 6, 2015 Hello Can any body offer any advice.I have a Carthago i44 2007 .the problem I have is the drop down bed,it doesn't seem to sit level when down. When parked up and level ( using spirit levels) the front of the bed rolls away towards the windscreen , I have changed the gas struts( previous owner forgot to mention they were shot) thought this was the problem .but it hasn't helped .i am now contemplating buying the froli system to see if I can cheat it level by fitting 1 row to rear of the bed.There doesn't seem to be any adjustment on the bed arms .Thanks Link to comment Share on other sites More sharing options...
Guest peter Posted April 7, 2015 Share Posted April 7, 2015 If it's electric, make sure it's fully down, which is when the motors should stop. Link to comment Share on other sites More sharing options...
tugga Posted April 7, 2015 Share Posted April 7, 2015 Ours does the same Nick1. Its not electric and we don't use it as we use the transverse bed at the back but we did try it out and it does slope towards the windscreen but its not enough that it would stop us sleeping. Do you have two supports each side that the inside rests on? We do make sure that the bed rests on these properly and securely. Link to comment Share on other sites More sharing options...
Guest peter Posted April 8, 2015 Share Posted April 8, 2015 Must have got it sorted. (?) Link to comment Share on other sites More sharing options...
nick1 Posted April 11, 2015 Author Share Posted April 11, 2015 Thanks for your replies.The bed isn't electric( didn't think they made an Aclass with an electric one)Will try and pack the side arms at the resting point to see if makes a differance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.