sydney.cole Posted June 27, 2015 Share Posted June 27, 2015 cant seem to change position the air blows the switch doest seem to move any differant Syd Link to comment Share on other sites More sharing options...
lennyhb Posted June 27, 2015 Share Posted June 27, 2015 Would help if you said what the heater is. or are you talking about the cab heater if so the resistor pack is probably burnt out, common fault. Link to comment Share on other sites More sharing options...
gocro Posted June 27, 2015 Share Posted June 27, 2015 Vehicle, year? If the blower works and you can vary the speed, then you have a mechanical problem, in early vans the levers are connected by stiff wires(Bowden cables) newer vehicles the flaps are moved by electric motors, fuses? Link to comment Share on other sites More sharing options...
sydney.cole Posted June 28, 2015 Author Share Posted June 28, 2015 Helo Cab heater mate every thing works fine but the the switch that positions the flow were you want to send it ie windsreen,floor its a 1996 wayfarer thanks for replying Syd Link to comment Share on other sites More sharing options...
sydney.cole Posted June 28, 2015 Author Share Posted June 28, 2015 Hello 1996 wayfarer can ajust temp, and speed but the switch that changes flow positionsnot doing any thing when move to another position Thanks for reply Syd Link to comment Share on other sites More sharing options...
Brian Kirby Posted June 28, 2015 Share Posted June 28, 2015 Then I think gocro has the correct answer, and the cable control has broken or become disconnected. You'll have to have a fish around behind the heater controls on the dash. Link to comment Share on other sites More sharing options...
sydney.cole Posted July 1, 2015 Author Share Posted July 1, 2015 Thanks all up and running Syd Link to comment Share on other sites More sharing options...
sydney.cole Posted July 1, 2015 Author Share Posted July 1, 2015 Thanks for that took radio out cable on back ofswitch had come of. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.