hymernova1 Posted July 31, 2015 Share Posted July 31, 2015 Hi all, my van doesn't have the external input to the Fiat fitted radio but the radio itself has an "aux" button so I'm thinking that I can plug in to the back of the radio if I can access it. I have the full facia type radio front with the twin holes on either side, I also have the wire gadgets that you slide into the twin holes and this releases the radio.......but it doesn't!!!! something is still gripping it. Does anyone know how to remove the radio. I assume there must be a hidden screw holding the radio in place as well as the clips on the side, but how on earth do you get to it??? Help required please (?) Link to comment Share on other sites More sharing options...
Dave R1664232361 Posted July 31, 2015 Share Posted July 31, 2015 My aux input and USB is sited under the radio between the cup holders. Link to comment Share on other sites More sharing options...
hymernova1 Posted July 31, 2015 Author Share Posted July 31, 2015 Thats what I don't have unfortunately, hence the need to access the back of the radio Link to comment Share on other sites More sharing options...
lynneroy Posted July 31, 2015 Share Posted July 31, 2015 My husband used a wide flat spatular or a paint scraper just slide it under the bottom front of the radio and prise it out.it is held in by spring clips,two on the bottom corners and two at the top. Be careful not to scratch anything. Link to comment Share on other sites More sharing options...
spospe Posted July 31, 2015 Share Posted July 31, 2015 I found that the radio was indeed a tight fit and needed prising out (with the removal tools in place) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.