andy mccord Posted February 17, 2016 Share Posted February 17, 2016 Afternoon all I have purchased all 3 of the high level marker light/ Brake light unit for my Adria Coral, as water has got inside the LED’s, they are supplied with extremely long Length of wire to each unit, I presume I will be able to just unscrew the unit and pull the wire out through the hole till I meet he spade end connector? Or is that wishful thinking? Regards Andy McCord Link to comment Share on other sites More sharing options...
Ninian Posted February 17, 2016 Share Posted February 17, 2016 Hi, I would say you are correct, when you remove the light from its position check if the fly lead colours are the same. If not before you change them check with multimeter for the +ve as LEDS only work one way. Then you can change one wire at a time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.