Jump to content



Recommended Posts

If they are both previous models they are probably interchangeable but if the new one is an X250 there might be a difference?


I see no reason why there would be a difference but when did a motor maker ever need a reason to change things for no obvious reason so proceed with caution.


It is not only where the bolt holes are and the diameter but also the width and the hub offset.


The diameter and width may well be stamped on the wheel rim but I doubt the offset will be.


It is easy enough to make a template for checking the bolt hole positions and you can check the hub offset but seeeing how far the wheel nut holes are from both the inner and outer rim using a straight edge and a steel rule.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...