Freetec 681

[Old nobby]

Hi

Does any one know where the water pump is on the Tec Freetec 681ti, got no running water from tank

[flicka]

Hi Nobby & welcome to the forum.

Not got specific location for the water pump on your Freetec. But generally there are 2 tpyes of pump available - standard (what you think of as a pump( or submersible.

For a "standard" pump check the water supply pipe from the tank & trace until the pump is located - mostly in close proximity to the tank.

A "submersible" is located within the water tank & can usually be identified by cables found on the top of the tank.

[Old nobby]

Many thanks will carry on looking think it's is a tank pump will have to take out and see.

[Derek Uzzell]

Welcome to the Out&AboutLive forums, Eddie.

 

I’m not familiar with the FreeTEC 681 Ti model, though there are quite a few on-line adverts for the 618 Ti (example here)

 

http://www.fsdonline.de/1602039

 

As flicka says, there are generally two types of pump, with the submersible type being within the fresh-water tank (and normally pretty quiet when running) and the pressure-sensitive diaphragm type that is outside the fresh-water tank (and normally fairly noisy when running).

 

This review of a FreeTEC 718 Ti

 

http://www.practicalmotorhome.com/reviews/motorhome/30101-tec-freetec-718-ti

 

mentions that “...the water pump is quite noisy...”, which suggests that the pump fitted to that vehicle was the pressure-sensitive diaphragm type.

 

Look in the fresh-water tank first. If the pump’s not there do as Flicka advises and follow the tank’s water outlet-hose.