Frank Beevers Posted May 16, 2016 Share Posted May 16, 2016 Can anyone tell me how to adjust the rear view camera on my 2012 Swift bolero. I want it to look further up the road. Thanks Frank Link to comment Share on other sites More sharing options...
JohnP Posted May 16, 2016 Share Posted May 16, 2016 Is this the version with two cameras in the rear house, or one camera which switches from near to distant view. Link to comment Share on other sites More sharing options...
Frank Beevers Posted May 16, 2016 Author Share Posted May 16, 2016 Yes there are two cameras in the same housing. The reversing camera is fine but the rear view camera needs adjustment. You can only see three or four cars behind the van Link to comment Share on other sites More sharing options...
JohnP Posted May 16, 2016 Share Posted May 16, 2016 There are two screws holding the housing to the rear panel. Remove these first. From memory the cameras are glued to the housing. If this is the case you will need something like Sikaflex to refit. Care when replacing the securing screws because it is easy to push the rubber embedded nuts into the bodywork. Link to comment Share on other sites More sharing options...
AliB Posted May 17, 2016 Share Posted May 17, 2016 Being able to see 3 or 4 cars behind is a reasonable setting. The camera will be pointing slightly downwards which will alleviate glare from car headlights and low sun. Link to comment Share on other sites More sharing options...
Frank Beevers Posted May 17, 2016 Author Share Posted May 17, 2016 Thanks for the info Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.