baden87 Posted June 13, 2016 Share Posted June 13, 2016 Hi all Auto trail Apache 634 2008 multi media system Just bought the van JVC head unit radio works when ignition off sounds good , switch ignition on and it just goes all woo shy , not a technical term lol as if it's of station tried tuning nothing .switch ignition off perfect any ideas guys Thanks Link to comment Share on other sites More sharing options...
tonyishuk Posted June 13, 2016 Share Posted June 13, 2016 Might help / might not of course !! http://www.crutchfield.com/S-zsLV25FkfwS/learn/learningcenter/car/noise_suppressors_installation_guide.html Rgds Link to comment Share on other sites More sharing options...
baden87 Posted June 13, 2016 Author Share Posted June 13, 2016 Thanks I'll read that not sure what it can be though don't even get to starting engine before it does it Link to comment Share on other sites More sharing options...
baden87 Posted June 18, 2016 Author Share Posted June 18, 2016 I think there has been some divine intervention , tried it today and hey presto working , I must have pressed something lol Link to comment Share on other sites More sharing options...
ken the kontiki Posted June 19, 2016 Share Posted June 19, 2016 Electrical interference caused by one or more items in the engine bay. Very common on the X250 cab, especially coachbult MHs where the aerial location is critical. Trying to eliminate this is like the holy grail. We've improved things by using the Status aerial to feed the radio but still not perfect. Even wing mounted aerials failed to improve matters for us. Link to comment Share on other sites More sharing options...
baden87 Posted June 19, 2016 Author Share Posted June 19, 2016 It's working fine still at the moment , so god knows what it was , only had motorhome a couple of weeks another problem is with the Ec 100 controller panel / vehicle battery When you press the vehicle battery button ( not on hook up ) the red light comes on indicating low battery , when tested it measured 12.7 volts at the battery , when you switch charger on its reading fine on the panel Any ideas ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.