trickydicky Posted August 7, 2016 Share Posted August 7, 2016 Hi, does anyone know if it is posible to remove graphic designs from a m/h and if it is,how to go about it please. Link to comment Share on other sites More sharing options...
sshortcircuit Posted August 7, 2016 Share Posted August 7, 2016 Heat with hair dryer and peel off. Good luck. If you get an edge up use a pressure washer, which I found to my cost. Link to comment Share on other sites More sharing options...
trickydicky Posted August 8, 2016 Author Share Posted August 8, 2016 Hi shortcut thanks for your reply. Hairdryer sounds like a good idea,but not sure about the pressure washer. Link to comment Share on other sites More sharing options...
Ali786786 Posted August 8, 2016 Share Posted August 8, 2016 Hi, Yes, definitely use a hair dryer. If you find you have gum/adhesive deposits which are stubborn, use autoglym tar remover. Al Link to comment Share on other sites More sharing options...
Geeco Posted August 9, 2016 Share Posted August 9, 2016 When my Auto-trail was delivered the dealer decided that he would advertise his business on the rear panel. It was almost a foot square and ugly. I used a hair dryer on medium heat and all the letters came off with no problems. I then washed the area with mineral turps to remove the last of the glue. Finally I polished the surface with auto polish. Now you cannot see any trace of the sign. Cheers, Link to comment Share on other sites More sharing options...
trickydicky Posted August 9, 2016 Author Share Posted August 9, 2016 Thank you for your advice.hair dryer it is then and i've found some autoglym in the shed. Link to comment Share on other sites More sharing options...
RogerC Posted August 10, 2016 Share Posted August 10, 2016 If they have been on for any length of time you might find the surrounding paint looks faded.....in which case a bit of T cut should help lessen the difference in colour............and a polish after of course. Petrol or tar remover is good for getting the adhesive residue off.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.