chris p Posted November 3, 2016 Share Posted November 3, 2016 Hi bulb out van has 3 round light units each side they look as they unsrew . Tried this bulb after part turn starts to move rang dealership they said they were held buy 2 spring clips and by using 2 flat headed srewdrives on these they would come off ill either break glass or mark plastic . Any suggestions thanks Link to comment Share on other sites More sharing options...
silverback Posted November 3, 2016 Share Posted November 3, 2016 on mine, there is a indentation on the lens to put the screwdriver then push and ease them off, use a cloth on the screwdriver i must say i have never done it, but know people who have, Jonathan Link to comment Share on other sites More sharing options...
chris p Posted November 6, 2016 Author Share Posted November 6, 2016 Thanks ill give it a go Link to comment Share on other sites More sharing options...
chris p Posted November 9, 2016 Author Share Posted November 9, 2016 Noticed small hole just below light their is a spring clip their with various poking about it came off maybe not the right way as strained it but its back in now working Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.