camsof Posted May 2, 2017 Share Posted May 2, 2017 Hi , just bought a Mercedes 711D camper van but the fan on the back of the Truma S3002 is not working . I'm getting 12V to the connector block on the back of the fan but nothing across the 2 wires connected to the fan. Tried putting 12v directly onto the 2 wires connected to the fan and still nothing so I'm guessing that both the fan speed control switch and the fan are faulty . Pretty sure its not been used in a while . I'm in france and only using for summer use so it will only be used in emergencies but question is it OK to run the heater without the fan ? thanks for some guidance Link to comment Share on other sites More sharing options...
Derek Uzzell Posted May 2, 2017 Share Posted May 2, 2017 Welcome to the Out&AboutLive forums. You can view/download S-3002 Installation and Operating Instruction documentation from here https://dealernew.truma.com/_anweisungen/Truma_Katalog/2%20gb/s_heizungen_gb/s_3002_gb.html Much of the attraction of this heater was that it could be used in convection-only mode, so operating yours wihout the Trumavent fan running should be OK. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.