plwsm2000 Posted March 13, 2018 Share Posted March 13, 2018 Just for info for those with similar setups. My Schaudt DT220 display unit has the ability to display the solar current going into the habitation battery and starter battery separately. The Votronic duo 250 mppt controller has only one output for the Schaudt EBL that according to the datasheet, is for the hab. battery solar current only. I made up a small circuit to measure the starter battery current and output it to the DT220 for the starter battery solar current. This is working well but while testing it, I noticed that the EBL output from the Votronic controller is actually the solar current in both batteries combined (not just the hab current). Votronic confirmed this and said they will amend their datasheet in due course. Link to comment Share on other sites More sharing options...
aandncaravan Posted March 13, 2018 Share Posted March 13, 2018 Please can you email the exact issue and the text from Votronic so we can post it on our Solar Power 'Hints' and Tips pages along side the Votronic data? aandncaravanservices@gmail.com We can then publish that so all can see. Thanks Natalie Link to comment Share on other sites More sharing options...
plwsm2000 Posted March 13, 2018 Author Share Posted March 13, 2018 Natalie, I have just emailed you the reply from Timo at Votronic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.