Jump to content

Hymer protective cover for ventilation exits


yoko8pups

Recommended Posts

Educated guess without a photo. I would suspect it is the exhaust vent for the gas water and air heater.

 

Mine is about 4inches in diameter, white, slightly dished inwards but with a small circular protrusion in the centre. The vent sits slightly proud of the side of the van and has an alloy seating on the van’s side.

 

You sometimes get condensation forming above it on the van side, it will be warm if you hover a hand above it when the heater is lit.

 

Davy

Link to comment
Share on other sites

yoko8pups

 

I’ve attached a photo of a 2005 Hymer 524GT

 

Which ‘cover’ are you referring to?

 

If it’s the round thing just the rear of the rear wheel-arch and above it, then (as TeamRienza says) it’s the end of the air-intake/exhaust for the gas-burner of a Truma heater. Truma refer to it as a ‘wall cowl’.

 

https://www.leisureshopdirect.com/gas/water/truma-heaters/wall-flue-cmw-bianco-c-w-cover-kkc

1766120606_Hymer524GT.jpg.69ffdc1c56e92e0ed1638f903e09d5f8.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...