ryanoh1988 Posted July 27, 2020 Share Posted July 27, 2020 Hi all, I have a 1997 Autosleeper Flair and on a recent trip away, I was unable to turn the cold side of the mixer tap off, the taphead was just spinning and not gripping the spindle. I've managed to remove the spindle but it looks nothing like anything I've seen before and wouldn't know where to start to look for a replacement! Any advice would be greatly appreciated! Link to photo here: https://drive.google.com/file/d/1TTtMYceyStEZI-MFUKOIqRwXVPpcp41f/view?usp=drivesdk Link to comment Share on other sites More sharing options...
Brian Kirby Posted July 27, 2020 Share Posted July 27, 2020 I think it may help if you could also post a picture of the whole mixer assembly, and also if you can find a manufacturer's name on the taps. I'm assuming this is the twin tap version that was fitted through the rear side of the sink bowl and has a vertically swivelling single faucet? Alternatively, have you tried Autosleepers, to see if they can identify the tap? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.