frederic Posted June 10, 2021 Share Posted June 10, 2021 Any of these out there? As fitted by AutosSeeper to their Topaz models Must have the tapered top tube to fit a standard Fiamma table boss. Link to comment Share on other sites More sharing options...
Derek Uzzell Posted June 10, 2021 Share Posted June 10, 2021 The Van Wurks advert for this product states that it is out of stock. https://www.vanwurks.co.uk/product/tables-and-fittings/cranked-table-leg-kit-deluxe Can Van Wurks tell you who makes this product, just in case it is still being produced? (I notice that you asked about this a week ago on the ASOF forum and received some responses.) https://www.autosleeper-ownersforum.com/t36024-table-leg-cranked-wanted Link to comment Share on other sites More sharing options...
frederic Posted June 10, 2021 Author Share Posted June 10, 2021 Yes but thought I might try a wider viewed forum in case someone has one surplus to requirements. Link to comment Share on other sites More sharing options...
flicka Posted June 10, 2021 Share Posted June 10, 2021 Try Magnum Motorhomes. I obtained one from them a few years ago. It also included a table plate & a locking nut for when inserted in the "swan neck" Link to comment Share on other sites More sharing options...
buddy Posted June 11, 2021 Share Posted June 11, 2021 There is something that seems to be similar on the leisurelines.net website in the section furniture fittings - tables Link to comment Share on other sites More sharing options...
Derek Uzzell Posted June 11, 2021 Share Posted June 11, 2021 On June 3 Frederic asked about this on the Auto-Sleeper Motorhome Owners Forum as follows Any one know of the source of one of these cranked leg swivel legs as fitted to the A/S Topaz etc Must have the tapered top boss to fit existing tables. The replies said a) the item was available through Auto-Sleepers’s parts department. b) that Frederic might try Camperlands at Sharston, Manchester. c) that the leg might be unique to Auto-Sleepers. The Van Wurks advert I provided a link to above suggests that the cranked table leg kit was not unique to Auto-Sleepers. The Van Wurks website lists various table-related items https://www.vanwurks.co.uk/product-category/tables-and-fittings and some of these look like they may have the same maker as the cranked leg kit. If Van Wurks can tell Frederic who makes/made the cranked leg, it might be possible to identify another source or to confirm that it is no longer marketed. Although leisure-vehicle cranked-leg table supports are readily available, it’s anybody’s guess whether any of these would meet Frederic’s specific requirement that the leg must fit a standard Fiamma table boss. (I’m not sure how much ‘viewing’ there is on these forums nowadays, so it might be worth Frederic trying asking on the larger MHFun and/or MHFacts forums. The chances of someone having this item and wanting to dispose of it will be very small, but one never knows...) Link to comment Share on other sites More sharing options...
frederic Posted June 12, 2021 Author Share Posted June 12, 2021 Thanks Derek Yes top must fit a Fiamma boss. No reply's from A/S or VanWurks as to alternative suppliers of this item!! frederic Link to comment Share on other sites More sharing options...
paulmold Posted June 12, 2021 Share Posted June 12, 2021 There is one shown here as in stock but don't know anything about the company or where they are based.... https://www.rgdlongjie.com/ Link to comment Share on other sites More sharing options...
Robinhood Posted June 12, 2021 Share Posted June 12, 2021 paulmold - 2021-06-12 12:45 PM There is one shown here as in stock but don't know anything about the company or where they are based.... https://www.rgdlongjie.com/ ...no contact details (other than an email address). Site (and email address) registered as "very suspicious" on German feedback. (Newly registered, and that contact email address appears to have been changed several times in a very short period). May be OK, but I'd certainly avoid. Link to comment Share on other sites More sharing options...
Derek Uzzell Posted June 12, 2021 Share Posted June 12, 2021 paulmold - 2021-06-12 12:45 PM There is one shown here as in stock but don't know anything about the company or where they are based.... https://www.rgdlongjie.com/ Paul Are you saying that the same cranked table leg shown in the picture on Frederic's initial posting (and on the Van Wurks website - though out of stock) is advertised on the RGDLON website? Or just that there is a cranked leg product advertised by RGDLON? (ie. in this advert) https://www.rgdlongjie.com/camper-van-caravan-motor-home-cranked-boom-arm-swivelling-table-leg-p-820448.htm Link to comment Share on other sites More sharing options...
paulmold Posted June 12, 2021 Share Posted June 12, 2021 Derek Uzzell - 2021-06-12 1:32 PM paulmold - 2021-06-12 12:45 PM There is one shown here as in stock but don't know anything about the company or where they are based.... https://www.rgdlongjie.com/ Paul Are you saying that the same cranked table leg shown in the picture on Frederic's initial posting (and on the Van Wurks website - though out of stock) is advertised on the RGDLON website? Or just that there is a cranked leg product advertised by RGDLON? (ie. in this advert) https://www.rgdlongjie.com/camper-van-caravan-motor-home-cranked-boom-arm-swivelling-table-leg-p-820448.htm Not the one you linked to but this one https://www.rgdlongjie.com/motorhome-caravan-camper-van-race-swing-out-table-leg-ssteel-tubular-fitting-p-823791.htm Its not same photo as Volkwork , I never said it was. Its same or similar design that fits a fiamma type plate. Link to comment Share on other sites More sharing options...
frederic Posted June 12, 2021 Author Share Posted June 12, 2021 Thanks all we will see how things develop. Will report back frederic Link to comment Share on other sites More sharing options...
Derek Uzzell Posted June 13, 2021 Share Posted June 13, 2021 paulmold - 2021-06-12 1:40 PM Not the one you linked to but this one https://www.rgdlongjie.com/motorhome-caravan-camper-van-race-swing-out-table-leg-ssteel-tubular-fitting-p-823791.htm Its not same photo as Volkwork , I never said it was. Its same or similar design that fits a fiamma type plate. Thanks - I searched the rgdlon website using “cranked table leg” as the search term, but the item I provided a link to was the only retrieval. As Robinhood has warned, there are online warnings about this website possibly being fake. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.