gipojoe Posted December 17, 2021 Share Posted December 17, 2021 Just need some advice , i got a elddis 195 on 17 plate , i bought a safefill 7,5 kg bottle ,So today i put this in gas compartment , its a tight fit and i had to move the regulator to the side to get safefill bottle in .When i put the regulator back into position and connected it to the original calor gas bottle , the gas didnt flow in the mhome , which was strange .On the gas hobs the gas was weak and went out , after messing around and moving the pipe connection into calor gas bottle , it eventually worked . my question is i am not understanding why the gas didnt flow initially, it took 45 mins messing ? any ideas? andy Link to comment Share on other sites More sharing options...
witzend Posted December 17, 2021 Share Posted December 17, 2021 gipojoe - 2021-12-17 9:07 PM any ideas Is there a green button on reg you need to depress until hob lights Link to comment Share on other sites More sharing options...
buddy Posted December 17, 2021 Share Posted December 17, 2021 If there is a safety cut out button on the bottle to regulator connection flexible tail it may have needed to be pressed to reset it to allow gas flow after it was disconnected and then re-connected. Link to comment Share on other sites More sharing options...
Derek Uzzell Posted December 18, 2021 Share Posted December 18, 2021 It seems that the gas system of recent-ish Elddis motorhomes includes a basic Whale-manufactured bulkhead-mounted 30mbar regulator (extract from handbook attached below). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.