Guest Keith M Posted July 13, 2005 Share Posted July 13, 2005 After using the awning today we wound it back in as usual but although the two red plastic pieces at the side signalled all was well at the sides things did not look right in the middle ie a gap remained between the holder and the awning edge. Anyone had similar problems? - any advice would be gratefully received. Link to comment Share on other sites More sharing options...
Guest Peter Goddard Posted July 14, 2005 Share Posted July 14, 2005 Ho, ho! We had a similar problem a while ago with our awning. We had simply rolled it up the wrong way, i.e. over the roller instead of under it (or maybe the other way round!). Have a look at yours an try re-rolling. Link to comment Share on other sites More sharing options...
Guest frankie Posted July 15, 2005 Share Posted July 15, 2005 WE had a similar problem where the red tabs were in the right place. We had inadvertantly put the foot on one of the legs in the wrong position. The mid section seemed to bulge out from the rest Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.