GuyGuerilla Posted May 12 Share Posted May 12 Hi All, hoping someone can offer some advice. I have recently replaced my one Varta 90Amh leisure battery with two 120Amh batteries linked in parallel. I have attached the positive wire to one of the batteries and the negative to the other so that they both drain equally. This was all suggested on all the research I did on forums, and YouTube. The problem is that it instantly blows a 20Amp fuse on the 'Internal Charging Module' which I assume is the Inverter?! Do I just need to increase the size of the fuse or would this just lead to damaging appliances and/or accessories? It has also been suggested that I might need a resistor between the batteries and the inverter? Any help would be greatly appreciated. Regards Terry Link to comment Share on other sites More sharing options...
Keithl Posted May 12 Share Posted May 12 Terry, This is exactly the same question you asked on Friday here I will lock this thread to keep all answers in one place. Keith. 1 Link to comment Share on other sites More sharing options...
Recommended Posts