Duncan1962 Posted June 19 Share Posted June 19 Omnistep problem. My omnistep only works when plugged in and switch set to engine battery charging position. Any ideas anyone please Quote Link to comment Share on other sites More sharing options...
Labby Posted June 19 Share Posted June 19 Try checking for a blown fuse near the starter battery positive terminal , it may be around 20amp. 1 Quote Link to comment Share on other sites More sharing options...
Duncan1962 Posted June 20 Author Share Posted June 20 Thankyou you were right, three fuses and 2 relays under the bonnet under a black cover. 15 amp and 20 amp blown, fixed problem but they blew again 10 minutes later, any further ideas please? TIA Quote Link to comment Share on other sites More sharing options...
Labby Posted June 20 Share Posted June 20 (edited) If both the 20amp (step starter battery supply) and 15amp (fridge ) fuses are blowing it could be worth checking the fridge operation is ok and also for signs of problems at the relay /fuse box connections. Edited June 20 by Labby Quote Link to comment Share on other sites More sharing options...
Duncan1962 Posted June 20 Author Share Posted June 20 Thankyou. Removed the fridge and found a three core cable which goes through the floor under the edge of the fridge which had all the insulation melted off it therefore causing intermittent short circuit. All repaired and working well. Thanks again. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.