Thai Bry Posted August 3 Share Posted August 3 Looking for any help or advise re our current problem. Some one has kindly reversed into the back of our van, and has broken the off side rear indicator light. I have received a complete new light fitting - as this is the only way of getting a new lens cover. Does anyone know how to fit the lens cove without having to remove the rear bumper section. Picture attached Quote Link to comment Share on other sites More sharing options...
onecal Posted August 8 Share Posted August 8 (edited) Hi Check if you have a little metal catch on the lens under your chrome bezel as shown in your owners manual You can always contact Erwin Hymer Group SE Holzstraße 19. D-88339 Bad Waldsee/GERMANY. E-Mail: info@erwinhymergroup.com. Web: www.erwinhymergroup.com. Phone: +49 7524 999-0 They are very helpful and may send you a photocopy of your owners manual if indeed you have not got one Regards Edited August 8 by onecal Quote Link to comment Share on other sites More sharing options...
Thai Bry Posted August 8 Author Share Posted August 8 1 hour ago, onecal said: Hi Check if you have a little metal catch on the lens under your chrome bezel as shown in your owners manual You can always contact Erwin Hymer Group SE Holzstraße 19. D-88339 Bad Waldsee/GERMANY. E-Mail: info@erwinhymergroup.com. Web: www.erwinhymergroup.com. Phone: +49 7524 999-0 They are very helpful and may send you a photocopy of your owners manual if indeed you have not got one Regards Many thanks Onecal( Brendan), i'd already looked at my manual that came with the van when new. All it says is to remove the 2 x screws, and remove the housing / chrome surround. It looks like the chrome surround may be have been set by some kind or sealant on manufacture. I didn't want to risk damaging the rear bumper, in trying to peel it away. I thought it strange that if the bulb had blown, how I was going to change the bulb, without some major surgery. I'll take another look at it over the weekend. Thanks once again for your advice. Quote Link to comment Share on other sites More sharing options...
onecal Posted August 8 Share Posted August 8 Hi I think they are just held by a clip on that model (as per owners manual) Yes they may have of course have been sealant put on them They should still twist a little (carefully) and allow them clip off Regards Quote Link to comment Share on other sites More sharing options...
Thai Bry Posted August 9 Author Share Posted August 9 (edited) 10 hours ago, onecal said: Hi I think they are just held by a clip on that model (as per owners manual) Yes they may have of course have been sealant put on them They should still twist a little (carefully) and allow them clip off Regards Many thanks once again.🙏 Edited August 9 by Thai Bry Quote Link to comment Share on other sites More sharing options...
Thai Bry Posted August 14 Author Share Posted August 14 Thanks to all that replied and helped. Van's going in for a Habitation check at a local specialist garage. And all will be sorted then. Quote Link to comment Share on other sites More sharing options...
onecal Posted August 15 Share Posted August 15 Hi Glad we could be of somewhat assistance to you Thank you for your reply . Happy motorhoming Regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.