Jump to content

Drafts in the Cab


Tanskavan

Recommended Posts

Not unless you've had a Vindaloo. :D The draught is probably coming from the door, there's a big vent in the end and holes in the interior of the pocket that go through to the door panel where the draught is probably coming in to the cab. Cover these large vents and see how it goes. Hope this makes sense.
Link to comment
Share on other sites

Guest Tracker

If you have a battery under the seat the wiring and vent holes might be too big?

 

There is also a violent draught that can come through the lower seat belt mounting.

 

Cover up the vent holes in the door itself - just under the door lock mechanism and striker plate.

 

On some vans the cab doors don't even shut properly and you may be able to peel the door seal off, bend the flange a bit, and refit the rubber to close this gap.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...