Vic Posted March 4, 2008 Share Posted March 4, 2008 I bought a pump for my Aquaroll which is powered by the socket next to my waterfill point. The first time of use, after pumping in the contents of the Aquaroll, I removed the plug and managed to pull the socket out of the side of the van. Having had the socket replaced, I tried again. The plug has points of different sizes but no matter which way up I put it in, it was a very tight fit. Despite carefully removing the plug on a number of occasions I have now damaged it and the wires are exposed. Obviously I am doing something wrong. Any ides? I have now resorted to sticking a funnel into the waterfill point and manually tipping the contents of the Aquaroll into it. 45 litres of water is quite heavy. I would be grateful for suggestions. Link to comment Share on other sites More sharing options...
Ranger Posted March 4, 2008 Share Posted March 4, 2008 Pop into the kitchen cupboard and get the cooking oil and lubricate the plug. On the other hand think how fit you will become if you keep lifting the aquaroll up and manually tipping the water into the tank. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.