woodstock dave Posted June 6, 2010 Share Posted June 6, 2010 Where is the temperature sender and relay (if any) for the electric radiator fan. {The fan is on permanently and stops only when unplugged near the fan (dangerous). I keep an eye on the temp gauge, weather and terrain plugging in only as the need is foreseen} - Where might I obtain a wiring diagram for the base vehicle (chassis cab with AL-KO rear chassis) Many thanks to all readers and helpers Link to comment Share on other sites More sharing options...
thebishbus Posted June 6, 2010 Share Posted June 6, 2010 Hi .I did reply on the other thread. The fan thermo switch should be at the bottom right hand side of the radiator, looking from the front, below the outlet hose. Brian B. Link to comment Share on other sites More sharing options...
woodstock dave Posted June 6, 2010 Author Share Posted June 6, 2010 Thanks Brian B--- I'll get searching. Link to comment Share on other sites More sharing options...
thebishbus Posted June 7, 2010 Share Posted June 7, 2010 Hi again Dave. Regarding your request for a wiring diagram,there is a partial diagram in the Peter Russek manual, order no 943. tel 01494 440829. Brian B. Link to comment Share on other sites More sharing options...
clay Posted June 7, 2010 Share Posted June 7, 2010 hi, cant help but i have over the last 2 months experienced the same prob. and have been unplugging the same. it will be nice to see what happens . best of luck (?) Link to comment Share on other sites More sharing options...
Brambles Posted June 8, 2010 Share Posted June 8, 2010 Maybe this link will help you guys.. http://www.ourwanderer.org/peug2.htm#FANS Jon. Link to comment Share on other sites More sharing options...
clay Posted June 8, 2010 Share Posted June 8, 2010 cheers brambles should be able to sort it now Link to comment Share on other sites More sharing options...
woodstock dave Posted June 20, 2010 Author Share Posted June 20, 2010 Thanks Brian B Yes I found the sensor and am replacing it. Thanks to all other respondents, the wiring diag is useful, but mine is 2.5td not 1.9td (thats my old Pug 306 car - pocket rocket or what)! My rad looks good, but it'll get checked Regards Woodstock Dave Link to comment Share on other sites More sharing options...
clay Posted June 20, 2010 Share Posted June 20, 2010 woodstock dave - 2010-06-20 5:17 PM Thanks Brian B Yes I found the sensor and am replacing it. Thanks to all other respondents, the wiring diag is useful, but mine is 2.5td not 1.9td (thats my old Pug 306 car - pocket rocket or what)! My rad looks good, but it'll get checked Regards Woodstock Dave did it do the trick dave. and how much did it cost Link to comment Share on other sites More sharing options...
BrianBW Posted January 21, 2015 Share Posted January 21, 2015 Regarding the link seen above, it is now: http://www.ourwanderer.uk/peug2.htm#FANS Note: not .org but .uk http://www.ourwanderer.org/peug2.htm#FANS Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.