tazdog6007 Posted February 23, 2011 Share Posted February 23, 2011 i see on the pic of your batt. monitor you also show a guide to the truma controls. not having this info means im guessing if ive got the right combination for heat/hot water.any chance of a look at that info?if i meet you i owe you a pint,just ordered the p section seal for the leaky side door. ;-) Link to comment Share on other sites More sharing options...
rolyk Posted February 23, 2011 Share Posted February 23, 2011 The card is a copy of the one that came with the Truma Combi. I scanned it, reduced the size a bit and laminated it as I could never remember the meaning of some of the symbols. Something to do with my age, no doubt. I'll email you a copy later. You'll find that the door seal fits perfectly, without any need to trim it at all. Just remember to use 2 coats of impact adhesive, applying the second coat when the first has dried. If you have enough P section left you can glue it to the underside of the left and right edges of the bonnet to help keep the water out of the engine bay. Roly Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.